clan-core/docs/site/guides/disk-encryption.md

This guide provides an example setup for a single-disk ZFS system with native encryption, accessible for decryption remotely.

!!! Warning This configuration only applies to systemd-boot enabled systems and requires UEFI booting.

Replace the highlighted lines with your own disk-id. You can find our your disk-id by executing:

lsblk --output NAME,ID-LINK,FSTYPE,SIZE,MOUNTPOINT

=== "Single Disk" Below is the configuration for disko.nix nix hl_lines="13 53" --8<-- "docs/code-examples/disko-single-disk.nix"

=== "Raid 1" Below is the configuration for disko.nix nix hl_lines="13 53 54" --8<-- "docs/code-examples/disko-raid.nix"

Below is the configuration for initrd.nix. Replace <yourkey> with your ssh public key. Replace kernelModules with the ethernet module loaded one on your target machine.

{config, pkgs, ...}:

{

  boot.initrd.systemd = {
    enable = true;
  };

  # uncomment this if you want to be asked for the decryption password on login
  #users.root.shell = "/bin/systemd-tty-ask-password-agent";

  boot.initrd.network = {
    enable = true;

    ssh = {
      enable = true;
      port = 7172;
      authorizedKeys = [ "<yourkey>" ];
      hostKeys = [
        "/var/lib/initrd_host_ed25519_key"
        "/var/lib/initrd_host_rsa_key"
      ];
    };
  };
  boot.initrd.availableKernelModules = [
    "xhci_pci"
  ];

  # Find out the required network card driver by running `lspci -k` on the target machine
  boot.initrd.kernelModules = [ "r8169" ];
}

Copying SSH Public Key

Before starting the installation process, ensure that the SSH public key is copied to the NixOS installer.

1. Copy your public SSH key to the installer, if it has not been copied already:

ssh-copy-id -o PreferredAuthentications=password -o PubkeyAuthentication=no root@nixos-installer.local

Prepare Secret Key and Partition Disks

1. Access the installer using SSH:

ssh root@nixos-installer.local

2. Create a secret.key file in /tmp using nano or another text editor:

nano /tmp/secret.key

3. Discard the old disk partition data:

blkdiscard /dev/disk/by-id/<installdisk>

4. Run clan machines install, only running kexec and disko, with the following command:

clan machines install gchq-local --target-host root@nixos-installer --phases kexec,disko

ZFS Pool Import and System Installation

1. SSH into the installer once again:

ssh root@nixos-installer.local

2. Run the following command on the remote installation environment:

zfs set keylocation=prompt zroot/root

3. Disconnect from the SSH session:

CTRL+D

4. Locally generate ssh host keys. You only need to generate ones for the algorithms you're using in authorizedKeys.

ssh-keygen -q -N "" -C "" -t ed25519 -f ./initrd_host_ed25519_key
ssh-keygen -q -N "" -C "" -t rsa -b 4096 -f ./initrd_host_rsa_key

5. Securely copy your local initrd ssh host keys to the installer's /mnt directory:

scp ./initrd_host* root@nixos-installer.local:/mnt/var/lib/

6. Install nixos to the mounted partitions

clan machines install gchq-local --target-host root@nixos-installer --phases install

7. After the installation process, unmount /mnt/boot, change the ZFS mountpoints and unmount all the ZFS volumes by exporting the zpool:

umount /mnt/boot
cd /
zfs set -u mountpoint=/ zroot/root/nixos
zfs set -u mountpoint=/tmp zroot/root/tmp
zfs set -u mountpoint=/home zroot/root/home
zpool export zroot

8. Perform a reboot of the machine and remove the USB installer.

Accessing the Initial Ramdisk (initrd) Environment

1. SSH into the initrd environment using the initrd_rsa_key and provided port:

ssh -p 7172 root@192.168.178.141

2. Run the systemd-tty-ask-password-agent utility to query a password:

systemd-tty-ask-password-agent

After completing these steps, your NixOS should be successfully installed and ready for use.

Note: Replace root@nixos-installer.local and 192.168.178.141 with the appropriate user and IP addresses for your setup. Also, adjust <SYS_PATH> to reflect the correct system path for your environment.